Use a guided setup to create a saved NextIO design from a Validation Model, then start the service and inspect its results.
RFC2544
The RFC2544 Getting Started Guide walks through creating the packet database sample, choosing two physical ports, setting up the throughput search, saving the generated design, and viewing the running test. It includes UI screenshots, the generated diagram, and Test Overview results.
HTTPx
The HTTPx Getting Started Guide uses the same XG1.1 / XG1.2 port pair for a stateful HTTP test. Create an HTTP GET traffic pattern, bind it to a Testcase, configure client and server hosts, generate the service, and inspect connection and response counters. UI screenshots follow each major setup stage through the completed run.
Before running either example, connect two available test ports through the device under test, or directly together for a baseline, and confirm that both links are ready.
After completing a test, follow Validation and Report to create acceptance rules and apply them to the recorded TestDB.
For the architecture and model relationships, read Introduction. For individual settings and constraints, use Components.